Low density porous ceramic filter made of Al2O3
 
 
High dust trapping efficiency greater than 99.8%
Maximized filtration area by implementing modular and variable shape
High air permeability and low operating pressure loss
Temperature resistant up to 800กษ
Excellent chemical resistance
Excellent erosion and corrosion resistance, hence longer usage life
Durability and lightweight
Controllable pore volume and size
Filter media recycling
Catalytic operation for harmful gas(NOx, VOC's, H2S) abatement
 
 
The ceramic filter hangs vertically from the header plate, which separates the clean and dirty compartments.
The hot gas is sucked through the filter elements from outside to inside, depositing the particles on the outer surface of the filter elements.
At regular intervals a sharp pulse of air is blown back down the inside of the filter element causing a momentary reversal of flow.
This reversal causes the cake (accumulated dusts) to be detached from the outer surface of the filter elements.
The dusts fall into the hopper section for disposal